Euro Style Lexan Polycarbonate Awning Panels for Outdoor Wind Resistant

Euro Style Outdoor Wind Resistant Lexan Polycarboante Awing Panels

Product Introduction

Polycarbonate awing panels sheet is made by polycarbonate solid sheet. Compared with common solid sheet, There is a special reinforcing design for pc stripe sheet, and the intensity for stripe sheet is better than common solid sheet. Single side contains UV protective layer, therefore, there are many excellent features of the sheet, such as good weather-resistance, good impact-resistance, heat insulation, soundproof, lighting, anti-UV and fire retardation, etc., and the sheet as very good roofing materials is widely used in ceiling lighting, ceiling access, outdoor decoration, sheds and greenhouse, etc.

Features of 0.3-15mm

1. Light transmission
PC solid sheet has very good light transmission. Prolonged sun exposure of UV coated plate does not produce yellowing, fogging and poor light. The loss of light transmittance is 6% for solid sheet and 15%-20% for PVC after ten years. As light through its convex particles produces light scattering, it has good optical effect. For more information about light transmission, please feel free to contact us.

2. Anti-UV & Heat Insulation

UV protective layer, 98% UV absorbed.

3. Light weight.

high impact strength,excellent physical and mechanical properties and well bending performance

The mechanical properties of pc embossed sheet are consistent with pc solid sheet. Maintaining good impact resistance for a long time in a wide temperature range (-40 °C -120 °C).

4. Fire retardation
The sheet meets the national standard GB8624-1997 and ranks at B1 retardant material level. In the process of combustion, the sheet does not produce any smoke and toxic gases, and automatically turns off from the fire. It has good fire retardant properties.

5.Wide-ranging application, good weather-resistance
Maintaining the stability of mechanical properties between -40°C to +100°C, the sheet does not occur the cold crisp above -100 ° C and without softening below 145 °C. Small size change from 100 ° C to -40 ° C, the rate of change is ≤ 0.3%. 2000 hours of artificial aging test towards the sheet, the yellowing degree was grade 2, and the transmission rate was decreased by 0.6%.

Speicfication:

picture of polycarbonate solid sheet for awing :

Guangdong Guoweixing Plastic Technology Co., Ltd (formerly known as Guangzhou Haoyi Building Material Co., Ltd) Guangdong Guoweixing Plastic Technology Co., Ltd. Locates in Nansha District, Guangzhou City, is the first joint-stock enterprise in the China PC extrusion industry. It has several world-class production lines covers PC solid sheet, PC hollow sheet and PC optical grade sheet. All products of the company are made of original material which is import from BAYER and SABIC.

As the pioneer of Polycarbonate sheet manufacturer, Guoweixing covers an area of 15,000 square meters; the modern workshop is up to 10,000 square meters and there are over 100 employees including more than a dozen of brilliant senior technicians.

"USE BY THE BEST MATERIAL, DESIGNED FOR THE BEST PRODUCTS" is our Slogan commitment to our customers The Company is into a comprehensive quality management system ISO 9001:2000.Our Products have gone through the National Chemical Building Materials Test Center, the National Fireproofing Construction Materials Quality Supervision and Inspection Center, SGS testing institution.

The products spread over not only our domestic market but also over 100 countries and regions worldwide such as America, Oceania, Africa, Mid-east, and South-east Asia. For High-quality products, professional technology, high-quality service, fast solution and more chance to friendly shake hands with the wide variety of customers in the world.